GTP HorsePower Talk

How to find a vacuum leak

feeds@yuku.com (SHORINJINN) — Wed, 09 Dec 2009 00:41:41 GMT

Guys i developed a Vacuum leak is giving me a code 0442 and 0452 for emission small leak, and emission sensor low output i checked the lines but nothing seems crack, the questions is is there an easy way to find out where the leak is coming from with out replacing all the vacuum lines and boots? thanks for your time.

18" tires

feeds@yuku.com (GTPM90) — Tue, 08 Dec 2009 21:38:05 GMT

just letting everyone know I have some tires for sale in the for sale section!! they are 245/40/R18

P0134 Code getting thrown

feeds@yuku.com (footballplaya3k) — Tue, 08 Dec 2009 20:29:21 GMT

So ever since I had the swap done (about a month ago) I have had the check engine light on, today I finally got the code pulled. It came up as P0134, which is the rear mani O2 sensor. I seem to recall this one is the important one and affects your A/F ratio and what not but this is just what I seem to remember from awhile ago. Input appreciated.

fuel pump replacement

feeds@yuku.com (snorulz) — Mon, 07 Dec 2009 23:21:30 GMT

Going to change my fuel pump tomorrow after work hours before the 12" of snow comes. Any tips or tricks I need to know? I have changed a couple fuel pumps before but not on a grand prix.

Thanks

Wiring harness

feeds@yuku.com (footballplaya3k) — Mon, 07 Dec 2009 13:29:34 GMT

What are the requirements for a wiring harness for our car. Like does it have to be year specific, model specific (GTP, GT, SE) and so on.

Thanks

Calender is done! Cars have been chosen and placed! Place your order now!!

feeds@yuku.com (gtpforever) — Mon, 07 Dec 2009 04:22:14 GMT

Order will now be taken for them and they are priced as of right now at about $16 like last year. This is mainly providing that we can get 25 calender order increments cause I am getting a discount for that amount. So lets hope for the amounts of 25,50, & 75 LOL! I am posting this at the top of the forum and will also send out a broadcast to all members to let everyone know. You can post here what you want and just click the paypal button at the top of the forum. Please leave a note in...

Wife is shopping for a new off shore car cause the GTP is throwing up all over the place.

feeds@yuku.com (Darkrain) — Sun, 06 Dec 2009 21:24:42 GMT

I need help. She owns a 2002 GTP with 108K. I have babied this car from the first day off the lot and its always been garaged washed and maintained just like GM wants it to be. About 6 months ago the ABS light came on. Took it to the Poncho garage they said we needed and new brake wiring harness to the tune of $1300 plus labor. I took it to another ATI mechanic and he said it needed a speed sensor on the right rear. We put on a new one light went out for about a week. Took it back and he...

Looking for good used radiator

feeds@yuku.com (gtp1192) — Sun, 06 Dec 2009 16:53:02 GMT

i have a 97 grand prix gtp and im lookin for a good used radiator anyone got one?..let me know..thanks

supporting mods?

feeds@yuku.com (87Duker) — Sun, 06 Dec 2009 13:05:47 GMT

Wondering what i need to run only a 3.5 or 3.6 pulley. I know right now car had 0 KR when i last checked. I also know nothing beats just scanning but like to get idea what you guys would suggest for supporting mods for only that small of a drop. I would assume CAI and u bend delete for starters

Need some B-Days from the following...............

feeds@yuku.com (gtpforever) — Sat, 05 Dec 2009 22:55:59 GMT

I need the following members B-Day's.............
Michael - mwalk00GTP Thank you!
Daniel - kripton Thank you!
Matt - copterdoctor Thank you!
Giuseppe - 1BlwnGTP Thank you!
Jessie - streetsports Thank you!...

01 GTP, Tech Help Needed, Pulley Questions, Tranny and Coolant Service, THANKS ALL

feeds@yuku.com (GTP2001ME) — Sat, 05 Dec 2009 20:30:05 GMT

Hello and Happy Holidays All,
I have several questions for you. Bone stock 51K mile 01 GTP car. There is a tensioner and and an idler pulley suspect, Not really suspect, They are ready to fail. So whats is the best way to correct??? I see a tension assembly pulley listed, can i change the pulley off the tensioner assembly? I am not positive is its the S/C tensioner, but am pretty sure it is. The tensioners, ie plural are spendy kinda is why i asked. Of course i will inspect both...

MPS pulley

feeds@yuku.com (2001goldGTP) — Sat, 05 Dec 2009 15:24:37 GMT

So i got my MPS from ZZP today and i noticed that the pulley is alot wider than the stock pulley, and i was wondering if i should worry aout the belt slipping off the sides of pulley

2010 Calender Pics/Poll for GTPlvr (Rob) By 1Fast99GTP

feeds@yuku.com (1fast99GTP) — Sat, 05 Dec 2009 07:11:50 GMT

#1 Please vote! Thanks

#2

#3

bye bye gtp

feeds@yuku.com (01gtp2o) — Sat, 05 Dec 2009 00:49:52 GMT

well sold my gtp with stage 4 heads xpz cam and so-on and so on for 2 grand....had a bad tranny again so it was time to get rid of it, and to be honest i couldn't be any happier cause tomorrow i pick this up at 8:00 am http://images.webmakerx.net//InventoryPhotos/2G1F/K1EJ/4A9/2G1FK1EJ4A9143643/2G1FK1EJ4A9143643_1.JPG . but wanted to say it was fun with the...

Valve Cover Gaskets

feeds@yuku.com (footballplaya3k) — Fri, 04 Dec 2009 13:33:42 GMT

The front valve cover is leaking on the new L32, the back probably is too. Anyone got suggestions on a certain type of gasket to use or know where to get some good ones?

Thanks

Wbody store phone number

feeds@yuku.com (snorulz) — Fri, 04 Dec 2009 09:42:30 GMT

Does anyone have a phone number for wbodystore? I ordered my fuel pump tuesday evening and the order still says processing. I normally am not this impatient but I obviously need the fuel pump ASAP.I have sent several e-mail to them but they have not contacted me back(only one about my order, the other were earlier in the week asking fuel pump questions). I want to find out if the pump is on backorder so I can cancel the order and get a pump coming.

Thanks

To all of those who have turned in full res shots for the calender! I need a certain couple months now and info from a a few people still.

feeds@yuku.com (gtpforever) — Fri, 04 Dec 2009 09:32:21 GMT

I need your First name, 3 months of choice to put pic on, and your birthday.

Newb to this forum & have some issues with my GTP that need to get info on

feeds@yuku.com (flaminwhite97GTP) — Thu, 03 Dec 2009 01:41:04 GMT

Hello everyone on GTPworld. I am going to introduce myself & my car before I explain my issues. My name is Donovan & I am a proud owner of a 1997 White Grand Prix GTP Coupe. It has 176k miles on it, but it runs good & it still has great power, but as with any older car with high miles it has it quirks.

Here are the issues:

1) When shifting in any shift pattern (upshifting downshifting) or letting go of the accelerator too hard the transmission thumps hard &...

Does anyone have an older (like 90 ish) 3.1L grand prix or cutlass?

feeds@yuku.com (2001goldGTP) — Tue, 01 Dec 2009 14:18:38 GMT

I also have and 1990 olds cutlass and when i start it i get what almost sounds like knock on the first stroke. I know the belt tensioner is going out but im wondering if there is anything else i should be concerned about like a valve.

calander pics?!

feeds@yuku.com (1BlwnGTP) — Tue, 01 Dec 2009 07:24:32 GMT

hey whatsupp I new to gtp world and just wanted to post up some pics of my ride, little by little it is getting there...also which do you guys think is good for the calander?

1

2

3

4

5
...